DB Start
#!/bin/sh
#
# $Id: dbstart.sh 22-may-2008.05:05:45 arogers Exp $
# Copyright (c) 1991, 2008, Oracle. All rights reserved.
#
###################################
#
# usage: dbstart $ORACLE_HOME
#
# This script is used to start ORACLE from /etc/rc(.local).
# It should ONLY be executed as part of the system boot procedure.
#
# This script will start all databases listed in the oratab file
# whose third field is a "Y". If the third field is set to "Y" and
# there is no ORACLE_SID for an entry (the first field is a *),
# then this script will ignore that entry.
#
# This script requires that ASM ORACLE_SID's start with a +, and
# that non-ASM instance ORACLE_SID's do not start with a +.
#
# If ASM instances are to be started with this script, it cannot
# be used inside an rc*.d directory, and should be invoked from
# rc.local only. Otherwise, the CSS service may not be available
# yet, and this script will block init from completing the boot
# cycle.
#
# If you want dbstart to auto-start a single-instance database that uses
# an ASM server that is auto-started by CRS (this is the default behavior
# for an ASM cluster), you must change the database's ORATAB entry to use
# a third field of "W" and the ASM's ORATAB entry to use a third field of "N".
# These values specify that dbstart auto-starts the database only after
# the ASM instance is up and running.
#
# Note:
# Use ORACLE_TRACE=T for tracing this script.
#
# The progress log for each instance bringup plus Error and Warning message[s]
# are logged in file $ORACLE_HOME/startup.log. The error messages related to
# instance bringup are also logged to syslog (system log module).
# The Listener log is located at $ORACLE_HOME_LISTNER/listener.log
#
# On all UNIX platforms except SOLARIS
# ORATAB=/etc/oratab
#
# To configure, update ORATAB with Instances that need to be started up
# Entries are of the form:
# $ORACLE_SID:$ORACLE_HOME::
# An example entry:
# main:/usr/lib/oracle/emagent_10g:Y
#
# Overall algorithm:
# 1) Bring up all ASM instances with 'Y' entry in status field in oratab entry
# 2) Bring up all Database instances with 'Y' entry in status field in
# oratab entry
# 3) If there are Database instances with 'W' entry in status field
# then
# iterate over all ASM instances (irrespective of 'Y' or 'N') AND
# wait for all of them to be started
# fi
# 4) Bring up all Database instances with 'W' entry in status field in
# oratab entry
#
#####################################
LOGMSG="logger -puser.alert -s "
trap 'exit' 1 2 3
# for script tracing
case $ORACLE_TRACE in
T) set -x ;;
esac
# Set path if path not set (if called from /etc/rc)
SAVE_PATH=/bin:/usr/bin:/etc:${PATH} ; export PATH
SAVE_LLP=$LD_LIBRARY_PATH
# First argument is used to bring up Oracle Net Listener
ORACLE_HOME_LISTNER=$1
if [ ! $ORACLE_HOME_LISTNER ] ; then
echo "ORACLE_HOME_LISTNER is not SET, unable to auto-start Oracle Net Listener"
echo "Usage: $0 ORACLE_HOME"
else
LOG=$ORACLE_HOME_LISTNER/listener.log
# Set the ORACLE_HOME for the Oracle Net Listener, it gets reset to
# a different ORACLE_HOME for each entry in the oratab.
export ORACLE_HOME=$ORACLE_HOME_LISTNER
# Start Oracle Net Listener
if [ -x $ORACLE_HOME_LISTNER/bin/tnslsnr ] ; then
echo "$0: Starting Oracle Net Listener" >> $LOG 2>&1
$ORACLE_HOME_LISTNER/bin/lsnrctl start $2 >> $LOG 2>&1 &
VER10LIST=`$ORACLE_HOME_LISTNER/bin/lsnrctl version | grep "LSNRCTL for " | cut -d' ' -f5 | cut -d'.' -f1`
export VER10LIST
else
echo "Failed to auto-start Oracle Net Listener using $ORACLE_HOME_LISTNER/bin/tnslsnr"
fi
fi
# Set this in accordance with the platform
ORATAB=/etc/oratab
if [ ! $ORATAB ] ; then
echo "$ORATAB not found"
exit 1;
fi
# Checks Version Mismatch between Listener and Database Instance.
# A version 10 listener is required for an Oracle Database 10g database.
# Previous versions of the listener are not supported for use with an Oracle
# Database 10g database. However, it is possible to use a version 10 listener
# with previous versions of the Oracle database.
checkversionmismatch() {
if [ $VER10LIST ] ; then
VER10INST=`sqlplus -V | grep "Release " | cut -d' ' -f3 | cut -d'.' -f1`
if [ $VER10LIST -lt $VER10INST ] ; then
$LOGMSG "Listener version $VER10LIST NOT supported with Database version $VER10INST"
$LOGMSG "Restart Oracle Net Listener using an alternate ORACLE_HOME_LISTNER:"
$LOGMSG "lsnrctl start"
fi
fi
}
# Starts a Database Instance
startinst() {
# Called programs use same database ID
export ORACLE_SID
# Put $ORACLE_HOME/bin into PATH and export.
PATH=$ORACLE_HOME/bin:${SAVE_PATH} ; export PATH
# add for bug # 652997
LD_LIBRARY_PATH=${ORACLE_HOME}/lib:${SAVE_LLP} ; export LD_LIBRARY_PATH
PFILE=${ORACLE_HOME}/dbs/init${ORACLE_SID}.ora
SPFILE=${ORACLE_HOME}/dbs/spfile${ORACLE_SID}.ora
SPFILE1=${ORACLE_HOME}/dbs/spfile.ora
echo ""
echo "$0: Starting up database \"$ORACLE_SID\""
date
echo ""
checkversionmismatch
# See if it is a V6 or V7 database
VERSION=undef
if [ -f $ORACLE_HOME/bin/sqldba ] ; then
SQLDBA=sqldba
VERSION=`$ORACLE_HOME/bin/sqldba command=exit | awk '
/SQL\*DBA: (Release|Version)/ {split($3, V, ".") ;
print V[1]}'`
case $VERSION in
"6") ;;
*) VERSION="internal" ;;
esac
else
if [ -f $ORACLE_HOME/bin/svrmgrl ] ; then
SQLDBA=svrmgrl
VERSION="internal"
else
SQLDBA="sqlplus /nolog"
fi
fi
STATUS=1
if [ -f $ORACLE_HOME/dbs/sgadef${ORACLE_SID}.dbf ] ; then
STATUS="-1"
fi
if [ -f $ORACLE_HOME/dbs/sgadef${ORACLE_SID}.ora ] ; then
STATUS="-1"
fi
pmon=`ps -ef | grep -w "ora_pmon_$ORACLE_SID" | grep -v grep`
if [ "$pmon" != "" ] ; then
STATUS="-1"
$LOGMSG "Warning: ${INST} \"${ORACLE_SID}\" already started."
fi
if [ $STATUS -eq -1 ] ; then
$LOGMSG "Warning: ${INST} \"${ORACLE_SID}\" possibly left running when system went down (system crash?)."
$LOGMSG "Action: Notify Database Administrator."
case $VERSION in
"6") sqldba "command=shutdown abort" ;;
"internal") $SQLDBA $args <>="" <&1="" 20="" 2="" 5="" 60="" ;; ="" ;;="" ;="" <="" [="" \"$oracle_sid\":="" \"${oracle_sid}\""="" \"${oracle_sid}\"."="" \"${oracle_sid}\"="" \"${w_oracle_sid}\"="" \#*) ="" ];="" ]="" `echo="" a+r="" a="" abort="" all="" allowed="" an="" and="" any="" are="" as="" asm="" attempting="" available."="" available.="" available="" awk="" be="" become="" before="" bin="" binaries="" blogger_on="" blogger_only="" bring="" bringing="" brings="" by="" called="" can="" case="" cat="" check="" chmod="" come="" comes="" command="startup" connect="" continue="" count="0" crs.="" crs="" crsctl="" css="" cut="" database="" db="" dbstartup="" dependency"="" dependency="" directory="" do="" done="" echo="" else="" entry="" eof="" esac="" every="" exit="" export="" fi ="" fi="" field="" file="" following="" for="" found="" grep="" has="" have="" here="" home="" id="" identified="" if="" ignore="" in="" incorrect="" init="" innner="" inst="ASM instance" install="" instance="" instance[s]="" instances"="" instances'="" instances,="" instances="" intact?="" internal="" interval=">" is="" it="" last="" line="" log="$ORACLE_HOME/startup.log" logging="" loop="" minutes="" necessary="" need="" node="`olsnodes" non-asm="" not="" now="" null="" n|y|w="" of="" oracle.="" oracle="" oracle_home="`echo" oracle_sid="" oratab="" out="" outer="" output="" prefix="" present?="" proceed="" programs="" quit="" rc="$?" read="" rnode="`srvctl" running"`="" same="" script's="" script="" scripts="" sec="" service.="" service="" shutdown="" sid="" sleep="" sqldba="" srvctl="" start"="" start="" startasminst()="" startasminst="" started"="" started."="" started="" starting="" startinst="" starts="" startup.="" startup.log"="" startup="" state)="" state="" status="1" sysdba="" that="" the="" then="" there="" this="" timed="" timeout="" to="" touch="" tries="" trouble="" try="" until="" up!="" up="" usage:="" use="" via="" w_oracle_sid="`echo" wait="" waiting="" warm="" was="" we="" when="" while="" with="" {="" |="" }="">
#
# $Id: dbstart.sh 22-may-2008.05:05:45 arogers Exp $
# Copyright (c) 1991, 2008, Oracle. All rights reserved.
#
###################################
#
# usage: dbstart $ORACLE_HOME
#
# This script is used to start ORACLE from /etc/rc(.local).
# It should ONLY be executed as part of the system boot procedure.
#
# This script will start all databases listed in the oratab file
# whose third field is a "Y". If the third field is set to "Y" and
# there is no ORACLE_SID for an entry (the first field is a *),
# then this script will ignore that entry.
#
# This script requires that ASM ORACLE_SID's start with a +, and
# that non-ASM instance ORACLE_SID's do not start with a +.
#
# If ASM instances are to be started with this script, it cannot
# be used inside an rc*.d directory, and should be invoked from
# rc.local only. Otherwise, the CSS service may not be available
# yet, and this script will block init from completing the boot
# cycle.
#
# If you want dbstart to auto-start a single-instance database that uses
# an ASM server that is auto-started by CRS (this is the default behavior
# for an ASM cluster), you must change the database's ORATAB entry to use
# a third field of "W" and the ASM's ORATAB entry to use a third field of "N".
# These values specify that dbstart auto-starts the database only after
# the ASM instance is up and running.
#
# Note:
# Use ORACLE_TRACE=T for tracing this script.
#
# The progress log for each instance bringup plus Error and Warning message[s]
# are logged in file $ORACLE_HOME/startup.log. The error messages related to
# instance bringup are also logged to syslog (system log module).
# The Listener log is located at $ORACLE_HOME_LISTNER/listener.log
#
# On all UNIX platforms except SOLARIS
# ORATAB=/etc/oratab
#
# To configure, update ORATAB with Instances that need to be started up
# Entries are of the form:
# $ORACLE_SID:$ORACLE_HOME:
# An example entry:
# main:/usr/lib/oracle/emagent_10g:Y
#
# Overall algorithm:
# 1) Bring up all ASM instances with 'Y' entry in status field in oratab entry
# 2) Bring up all Database instances with 'Y' entry in status field in
# oratab entry
# 3) If there are Database instances with 'W' entry in status field
# then
# iterate over all ASM instances (irrespective of 'Y' or 'N') AND
# wait for all of them to be started
# fi
# 4) Bring up all Database instances with 'W' entry in status field in
# oratab entry
#
#####################################
LOGMSG="logger -puser.alert -s "
trap 'exit' 1 2 3
# for script tracing
case $ORACLE_TRACE in
T) set -x ;;
esac
# Set path if path not set (if called from /etc/rc)
SAVE_PATH=/bin:/usr/bin:/etc:${PATH} ; export PATH
SAVE_LLP=$LD_LIBRARY_PATH
# First argument is used to bring up Oracle Net Listener
ORACLE_HOME_LISTNER=$1
if [ ! $ORACLE_HOME_LISTNER ] ; then
echo "ORACLE_HOME_LISTNER is not SET, unable to auto-start Oracle Net Listener"
echo "Usage: $0 ORACLE_HOME"
else
LOG=$ORACLE_HOME_LISTNER/listener.log
# Set the ORACLE_HOME for the Oracle Net Listener, it gets reset to
# a different ORACLE_HOME for each entry in the oratab.
export ORACLE_HOME=$ORACLE_HOME_LISTNER
# Start Oracle Net Listener
if [ -x $ORACLE_HOME_LISTNER/bin/tnslsnr ] ; then
echo "$0: Starting Oracle Net Listener" >> $LOG 2>&1
$ORACLE_HOME_LISTNER/bin/lsnrctl start $2 >> $LOG 2>&1 &
VER10LIST=`$ORACLE_HOME_LISTNER/bin/lsnrctl version | grep "LSNRCTL for " | cut -d' ' -f5 | cut -d'.' -f1`
export VER10LIST
else
echo "Failed to auto-start Oracle Net Listener using $ORACLE_HOME_LISTNER/bin/tnslsnr"
fi
fi
# Set this in accordance with the platform
ORATAB=/etc/oratab
if [ ! $ORATAB ] ; then
echo "$ORATAB not found"
exit 1;
fi
# Checks Version Mismatch between Listener and Database Instance.
# A version 10 listener is required for an Oracle Database 10g database.
# Previous versions of the listener are not supported for use with an Oracle
# Database 10g database. However, it is possible to use a version 10 listener
# with previous versions of the Oracle database.
checkversionmismatch() {
if [ $VER10LIST ] ; then
VER10INST=`sqlplus -V | grep "Release " | cut -d' ' -f3 | cut -d'.' -f1`
if [ $VER10LIST -lt $VER10INST ] ; then
$LOGMSG "Listener version $VER10LIST NOT supported with Database version $VER10INST"
$LOGMSG "Restart Oracle Net Listener using an alternate ORACLE_HOME_LISTNER:"
$LOGMSG "lsnrctl start"
fi
fi
}
# Starts a Database Instance
startinst() {
# Called programs use same database ID
export ORACLE_SID
# Put $ORACLE_HOME/bin into PATH and export.
PATH=$ORACLE_HOME/bin:${SAVE_PATH} ; export PATH
# add for bug # 652997
LD_LIBRARY_PATH=${ORACLE_HOME}/lib:${SAVE_LLP} ; export LD_LIBRARY_PATH
PFILE=${ORACLE_HOME}/dbs/init${ORACLE_SID}.ora
SPFILE=${ORACLE_HOME}/dbs/spfile${ORACLE_SID}.ora
SPFILE1=${ORACLE_HOME}/dbs/spfile.ora
echo ""
echo "$0: Starting up database \"$ORACLE_SID\""
date
echo ""
checkversionmismatch
# See if it is a V6 or V7 database
VERSION=undef
if [ -f $ORACLE_HOME/bin/sqldba ] ; then
SQLDBA=sqldba
VERSION=`$ORACLE_HOME/bin/sqldba command=exit | awk '
/SQL\*DBA: (Release|Version)/ {split($3, V, ".") ;
print V[1]}'`
case $VERSION in
"6") ;;
*) VERSION="internal" ;;
esac
else
if [ -f $ORACLE_HOME/bin/svrmgrl ] ; then
SQLDBA=svrmgrl
VERSION="internal"
else
SQLDBA="sqlplus /nolog"
fi
fi
STATUS=1
if [ -f $ORACLE_HOME/dbs/sgadef${ORACLE_SID}.dbf ] ; then
STATUS="-1"
fi
if [ -f $ORACLE_HOME/dbs/sgadef${ORACLE_SID}.ora ] ; then
STATUS="-1"
fi
pmon=`ps -ef | grep -w "ora_pmon_$ORACLE_SID" | grep -v grep`
if [ "$pmon" != "" ] ; then
STATUS="-1"
$LOGMSG "Warning: ${INST} \"${ORACLE_SID}\" already started."
fi
if [ $STATUS -eq -1 ] ; then
$LOGMSG "Warning: ${INST} \"${ORACLE_SID}\" possibly left running when system went down (system crash?)."
$LOGMSG "Action: Notify Database Administrator."
case $VERSION in
"6") sqldba "command=shutdown abort" ;;
"internal") $SQLDBA $args <
posted by Arnab Mukherjee @ 10:56 PM
0 Comments
0 Comments:
Post a Comment
Subscribe to Post Comments [Atom]
<< Home